Slim Crosman LDC

Airgun Universe Slim Crosman LDC <p>Need to quiet down that Crosman airgun? This slim profile LDC will quiet down your Crosman 22XX, 13XX, Maximus, and Discovery airguns without adding a bunch of bulk to your airgun.</p><p><strong>Specifications</strong></p><ul><li>Overall length: 5.75\"</li><li>Diameter: .79\"</li><li>Construction: ABS 3D printed monocore set in a polymer shell with a decorative vinyl wrap</li><li>Slip fit installation with 4 set screws. Designed for standard Crosman barrels and other air rifles with 11mm diameter barrels. Does not work with 1/2-20 threaded barrels!</li></ul><p><strong>Installation</strong></p><p>To install, unload your airgun, put it on safe, and depressurize. Remove your front sight. Slip the LDC over the muzzle, it should be a tight fit, rotate if necessary to get it to fully seat. Once it is seated, shine a light through the breech to verify that the LDC is concentric with the barrel. Rotate until alignment is reached. Alternately tighten the four set screws until you feel them touch the barrel, do not over tighten!</p><p>If you have any questions, please feel free to <a href=\"https://www.airgununiverse.net/wp/contact-me/\">ask me</a>!</p>
$24.00

Home / Shop

Slim Crosman LDC

$24.00
Slim Crosman LDC
Slim Crosman LDC

Home / Shop

Slim Crosman LDC

$24.00
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 2 is allowed
24.000
5 Left in Stock
Maximum purchase amount of 2 is allowed
Categories: LDC
Manufacturer: Airgun Universe
  • Description

Need to quiet down that Crosman airgun? This slim profile LDC will quiet down your Crosman 22XX, 13XX, Maximus, and Discovery airguns without adding a bunch of bulk to your airgun.

Specifications

  • Overall length: 5.75"
  • Diameter: .79"
  • Construction: ABS 3D printed monocore set in a polymer shell with a decorative vinyl wrap
  • Slip fit installation with 4 set screws. Designed for standard Crosman barrels and other air rifles with 11mm diameter barrels. Does not work with 1/2-20 threaded barrels!

Installation

To install, unload your airgun, put it on safe, and depressurize. Remove your front sight. Slip the LDC over the muzzle, it should be a tight fit, rotate if necessary to get it to fully seat. Once it is seated, shine a light through the breech to verify that the LDC is concentric with the barrel. Rotate until alignment is reached. Alternately tighten the four set screws until you feel them touch the barrel, do not over tighten!

If you have any questions, please feel free to ask me!

Leave a Reply