Slim Crosman LDC
Need to quiet down that Crosman airgun? This slim profile LDC will quiet down your Crosman 22XX, 13XX, Maximus, and Discovery airguns without adding a bunch of bulk to your airgun.
- Overall length: 5.75"
- Diameter: .79"
- Caliber: works with both .177 and .22
- Construction: ABS 3D printed monocore set in a polymer shell with a decorative vinyl wrap
- Slip fit installation with 4 set screws. Designed for standard Crosman barrels and other air rifles with 11mm diameter barrels. Does not work with 1/2-20 threaded barrels!
To install, unload your airgun, put it on safe, and depressurize. Remove your front sight. Slip the LDC over the muzzle, it should be a tight fit, rotate if necessary to get it to fully seat. Once it is seated, shine a light through the breech to verify that the LDC is concentric with the barrel. Rotate until alignment is reached. Alternately tighten the four set screws until you feel them touch the barrel, do not over tighten! If clipping occurs, loosen the set screws, rotate 90*, look for concentricity, retighten.
Please note, if you are using on a 1377 or 1322, you must have at least an inch of barrel exposed past the pump tube! Also, fill cap modifications may be necessary on PCP rifles.
If you have any questions, please feel free to ask me!