LDC for Crosman 2100, 1077, etc
This is the latest version of my Crosman multipump LDC design. Don't fall for the copycats out there - this one has years of innovation behind the design and hundreds of satisfied customers. As with all my multipump LDC designs, this one captures the barrel and shroud with much tighter tolerances than the factory front sight assembly. This often yields better accuracy than the rifle was originally capable of.
This LDC is .94" in diameter and is 5.375" long. It weighs 1.15 oz, so it doesn't upset the balance of your air rifle. It is constructed of high temperature ABS and HDPE, so it won't warp in the hot sun like the inferior imitations made of PLA. It features a choice of a super fine green or red fiber optic sight. This front sight is located on the end of the LDC, further increasing the sight radius for better accuracy.
It will fit the following airguns:
- Crosman 2100, 1077, 766, Legacy 1000
- Benjamin Wildfire
Installation is simple. Make sure your airgun is unloaded and not charged with air or CO2. Use a block of wood to knock the front sight forward and out of the barrel shroud. Install the LDC in its place, making sure the inner barrel goes into the LDC. If the inner barrel wont guide in, use a piece of string to lift it up to get it started. Tighten the preinstalled set screw until it stops, do not over tighten. Sight in your airgun.