Benjamin Trail NP Pistol LDC

Airgun Universe Benjamin Trail NP Pistol LDC <p>Quiet down your Benjamin Trail NP pistol with this high performance polymer LDC. It is almost 6\" long, and 24mm in diameter. It only adds 3\" to your overall length, keeping your air pistol as compact as possible. Since it replaces your front sight, you\'ll need a pistol scope or red dot sight. </p><p>To install, remove your existing front sight. It should twist off with a wrench. Press on your LDC, gently rotating if necessary. Tighten all 4 set screws until they give slight resistance, do not over tighten.</p><p>Your LDC can be customized with paint designed for plastics or you can apply a custom vinyl wrap. Be sure to hold the section over the barrel, not the very end, when cocking your air pistol. This is designed for 15mm barrels and will likely work well for other spring or gas piston air pistols with that barrel size.</p>
$24.00

Home / Shop

Benjamin Trail NP Pistol LDC

$24.00
Benjamin Trail NP Pistol LDC
Benjamin Trail NP Pistol LDC
Benjamin Trail NP Pistol LDC
Benjamin Trail NP Pistol LDC
Benjamin Trail NP Pistol LDC
Benjamin Trail NP Pistol LDC
Benjamin Trail NP Pistol LDC
Benjamin Trail NP Pistol LDC

Home / Shop

Benjamin Trail NP Pistol LDC

$24.00
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 2 is allowed
24.000
2 Left in Stock
Maximum purchase amount of 2 is allowed
Manufacturer: Airgun Universe
  • Description

Quiet down your Benjamin Trail NP pistol with this high performance polymer LDC. It is almost 6" long, and 24mm in diameter. It only adds 3" to your overall length, keeping your air pistol as compact as possible. Since it replaces your front sight, you'll need a pistol scope or red dot sight. 

To install, remove your existing front sight. It should twist off with a wrench. Press on your LDC, gently rotating if necessary. Tighten all 4 set screws until they give slight resistance, do not over tighten.

Your LDC can be customized with paint designed for plastics or you can apply a custom vinyl wrap. Be sure to hold the section over the barrel, not the very end, when cocking your air pistol. This is designed for 15mm barrels and will likely work well for other spring or gas piston air pistols with that barrel size.

Leave a Reply