6" Hunter Class LDC
This LDC is designed with the hunter in mind - where you need sound suppression, but you also need maneuverability. It is designed for CO2, PCP, and multipump platforms. It can be used on spring and gas ram airguns as long as it isn't used as a cocking handle. Select your barrel size from the drop down menu.
- Overall length: 6"
- Diameter: .94"
- Weight: 1.41 oz
- Contruction: 3D printed ABS monocore set in a polymer shell with a decorative vinyl wrap
- Slip fit installation with 4 set screws. Designed for the barrel diameter you select. Not designed for threaded barrels!
To install, unload your airgun, put it on safe, and depressurize. Remove your front sight. Slip the LDC over the muzzle, it should be a tight fit, rotate if necessary to get it to fully seat. Once it is seated, shine a light through the breech to verify that the LDC is concentric with the barrel. Rotate until alignment is reached. Alternately tighten the four set screws until you feel them touch the barrel, do not over tighten!
This model will not fit the Benjamin Discovery and requires a longer barrel on 2240 and 13XX platforms for proper clearances.
If you have any questions, please feel free to ask me!