Author Topic: PVC With High Efficiency Valve Build  (Read 2158 times)

Offline Pellethuntr

  • Vendor
  • Hero Member
  • *****
  • Posts: 760
  • Likes 3
  • I built the .50 cal BEAST at 300+fpe
    • View Profile
PVC With High Efficiency Valve Build
« on: July 05, 2012, 08:58:26 PM »
Alright, well my plans for a high efficiency valve for use in low pressure PVC guns is progressing.. I ordered a 12x1.5 inch piece of delrin for the valve body in these PVC airguns.. The idea is to turn down the delrin to the correct size to fit in these 1 inch PVC coupling and the valve can be glued inline just like a regular PVC fitting

Notice: If these valves perform well and are durable and powerful enough they will be for sale in the near future

A pic of the delrin next to a piece of 1 inch schedule 40 PVC with a coupling

And some pics of basically how the valve will be used in the PVC airguns

« Last Edit: July 10, 2012, 07:18:02 PM by Pellethuntr »
Soy por lo tanto hago...I am therefore I do

Go Check Out My Custom Airgun And Parts Store!,24.0.html