« previous next »
Pages: [1]

Author Topic: Sprinkler Valve Airgun  (Read 2190 times)

Offline theairgunman

  • Full Member
  • ***
  • Posts: 203
  • Post Quality Meter 0
    • View Profile
    • Airgun Universe
Sprinkler Valve Airgun
« on: February 11, 2009, 07:45:58 PM »
This is a picture of my last big airgun project:
I've used it to take down a couple of rabbits as well as test out a variety of ammo. It has been fun to shoot, but I decided it was time to move on from PVC and sprinkler valves and start making more advanced projects. It was later coupled with a back mounted air system that allowed me to be free from pumping between shots. It could hit a little over 100 fpe with .58 cal muzzleloader balls and 700 fps with 1/2" slingshot marbles. Another concept I tried sucessfully with this airgun was interchangeable barrels.
Logged

Offline Pellethuntr

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 498
  • Post Quality Meter 0
  • I built the .50 cal BEAST at 300+fpe
    • View Profile
Re: Sprinkler Valve Airgun
« Reply #1 on: February 12, 2009, 08:46:10 AM »
 Cool! Is this the pic thread I asked for wooohooo!
Logged
The basis of government is the consent of the governed.

Soy por lo tanto hago...I am therefore I do

Offline Lord Joshy

  • Global Moderator
  • Full Member
  • *****
  • Posts: 129
  • Post Quality Meter 0
    • View Profile
Re: Sprinkler Valve Airgun
« Reply #2 on: January 28, 2012, 11:45:07 PM »
Thats really sick. Is presume that larger part at the back is the tank? If so, its tiny!!! how much PSI can you hold? Are you using pressure PVC or copper?
Logged
Lord Joshy, Airgununiverse.net MOD.
-----------------------------------------
Quick Links (Click em):
Send Pm
Send Email
My Profile
My Guns
Thumb's up if you liked this post.

Offline Pellethuntr

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 498
  • Post Quality Meter 0
  • I built the .50 cal BEAST at 300+fpe
    • View Profile
Re: Sprinkler Valve Airgun
« Reply #3 on: February 01, 2012, 09:03:36 AM »
Quote from: Lord Joshy on January 28, 2012, 11:45:07 PM
Thats really sick. Is presume that larger part at the back is the tank? If so, its tiny!!! how much PSI can you hold? Are you using pressure PVC or copper?

Looks like pvc to me.. That airtanks really isn't that small, when I was running 2,000 psi out of mine I would us a 1x8 inch piece of steel tubing to get fantastic results.. the more pressure you have the smaller your airtank can be  8)
Logged
The basis of government is the consent of the governed.

Soy por lo tanto hago...I am therefore I do
Pages: [1]
« previous next »